LessonsLesson 2 of 10

The LDU

What unit do the sums use, and where does it come from?

Every drawing and every sum on this site is in LDU. It is not a LEGO unit: builders worked it out from the bricks themselves. This lesson says what it is, where it came from, and why it makes sideways sums easy.

What it is

One LDU is 0.4 mm

LDU stands for LDraw unit. It is a length of 0.4 mm, chosen so that the sizes of LEGO parts come out as whole numbers.

A stud is 20 LDU wide. A brick is 24 LDU tall, a plate is 8, and half a plate is 4. Those four numbers are enough for almost every sum on this site.

1 stud20 LDU = 8.0 mm1 brick, tall24 LDU = 9.6 mm1 plate, tall8 LDU = 3.2 mmhalf a plate4 LDU = 1.6 mm
The four lengths drawn to the same scale, in LDU and in millimetres.

Where it comes from

A unit found by measuring

In 1995 a builder named James Jessiman wrote LDraw, a program for drawing LEGO models on a computer, and began describing parts in files that anyone could share. LEGO does not publish its drawings, so the numbers had to come from measuring real bricks.

The bricks turn out to be designed on a single step. Almost every dimension is a multiple of 1.6 mm: walls are 1.6 mm thick, a stud is three of those across, a brick is five wide and six tall. The LDraw unit is a quarter of that step.

20 = 5 squares24 = 6stud 12 = 34 = 1wall 4 = 1 square
A 1×1 brick cut through the middle, on a grid of 1.6 mm squares. Every edge lands on a line. One square is 4 LDU.

Why it suits sideways building

A quarter of 1.6 mm

One LDU is 0.4 mm. At that size the three lengths that matter become whole numbers that are easy to add: a stud is 20, a brick is 24, a plate is 8.

The same is true of everything smaller. Half a plate is 4, a quarter plate is 2, and the finest offset builders make is 1. In studs or plates those are fractions; in millimetres they are decimals.

1 plate8 LDUhalf a plate4 LDUquarter plate2 LDUfinest offset1 LDU = 0.4 mm
The small lengths, enlarged: each is a whole number of LDU.

The same five lengths in four units. Only the last column can be added in your head.

One length, four ways to write it
ViewLengthmmIn studsIn platesLDU
20Stud8.012½20
24Brick, tall9.61⅕324
8Plate, tall3.2⅖18
4Half plate1.6⅕½4
2Quarter plate0.8⅒¼2

Download CSV

Watch out

LDU is a design size, not a measurement

LDU describes the size a part is designed to, not the plastic in your hand. Real parts are made a hair smaller, about 0.1 mm on each side, so that neighbours slide together.

The LDraw parts library is drawn by volunteers to those design sizes. It is a careful model of each part, not a record of every mould LEGO has made of it.

The 0.4 mm figure is itself a rounding: the LDraw specification calls it an approximation, and careful measurements put the unit nearer 0.399 mm. Neither difference is large enough to see in a build.

The orange line marks the seam between two bricks, where the clearance is.

Sources: the LDraw file format specification and BrickNerd’s LDU and You.

Words introduced