LessonsLesson 7 of 10

Less than a stud

How do I shift by half a stud, or by a hair?

Not everything belongs on the grid. Centring a part one stud wide on a part two studs wide, setting a detail back by a hair, making two sideways sections meet: each needs a shift smaller than a stud or a plate. That deliberate shift is called an offset, and this lesson shows which part gives each size.

Three sizes

Three sizes cover almost every case. Half a stud is 10 LDU. Half a plate is 4. A quarter of a plate is 2.

Each comes from a particular part. The half plate is introduced in lesson 3 and put to work in lesson 5, A smooth sideways wall. This lesson covers the other two.

Three sizes, three sources: half a stud from a jumper, half a plate from a bracket wall or a headlight brick, and a quarter plate from a plate stood in a jumper’s half stud.

10
The orange bar is the largest of the three: the half stud a jumper gives, 10 LDU.

In a real set

Himeji Castle, set 21060, 2023.

The castle is built almost entirely with studs on top. Its narrow windows and stepped roofs come from bricks set half a stud off the grid, on jumpers and on round plates with an open stud. The slit left between a shifted brick and its neighbour is the window.

Described in New Elementary’s review of the set. The drawing shows the idea with seven parts, not a section of the model.

Three bricks in a row on a long plate. The middle brick sits on an ordinary stud; the bricks either side sit on jumpers, half a stud further out, leaving a narrow slit on each side of the middle brick
Red, two jumpers. The bricks on them stand half a stud away from the middle brick.

A build to try

You need a 1 × 2 jumper, a 1 × 1 brick and a 2 × 4 plate.

Put the jumper on the plate and the brick on the jumper. The brick stands between two studs of the plate below, with the same space on each side: half a stud.

Jumper plate shifts the next layer by half a stud (3D view)
A brick centred on a jumper.

In this lesson