Lessons4 · Turning a stud

Bracket walls

A bracket’s upright wall is where the half plate usually comes from, but four brackets break the pattern. Check the wall before you trust the 4.

A bracket is a plate with an upright wall on one edge, and its side studs are on that wall. On most brackets the wall is half a plate thick, 4 LDU, and stands just outside the outline of the plate. That is the half plate that makes a bracket useful: add two plates on edge and the three together come to 4 + 8 + 8 = 20, exactly one stud.

A 1 × 2 bracket with its wall pointing up
A bracket (99780): a plate with an upright wall on one edge, and the side studs on the wall.

Four brackets have a different wall, and the sum changes with it. The 2 × 2 bracket with a 2 × 2 wall (3956) has a wall a full plate thick, 8 LDU. The centred bracket (41682) also has a full-plate wall, but in the middle of the plate instead of on its edge, with studs on one face and hollows on the other. The thin neck bracket made for minifigures (42446) has a 3 LDU wall, and the two-stud neck bracket (18986) a 7 LDU one.

4Bracket 1×1 – 1×1, down: wall 4 LDU (3D view)
36841: the usual half-plate wall, 4 LDU, outside the footprint.
8Bracket 2x2 – 2x2 up: wall 8 LDU (3D view)
3956: a full-plate wall, 8 LDU, outside the footprint.
8Bracket 2×2 – 1×2, centred: wall 8 LDU (3D view)
41682: a full-plate wall on the centreline, studs on one face only.