A clip on a bar is not the only hinge. These are the other parts that turn, what each is good for, and what it costs.
Each of these works only as a pair, so each is drawn as a pair: one half grey, its partner blue.
Click hinge44302, 44301, 30383, 60471Two plates with toothed fingers that mesh. It moves in steps of 22.5° and stays where you put it, so use it when the angle has to carry weight. It cannot make an angle between two steps.
Hinge brick 1 × 23937 + 3938A brick in two halves joined along one top edge. Closed, it is exactly one brick tall. The top half lifts like a lid to any angle and holds by friction only.
Swivel hinge plate 1 × 42429 + 2430Two plates on an upright pin. It turns in the flat, not upward: for a wall that leaves at an angle when seen from above.
Turntable 2 × 23680 + 3679A base with a top that turns freely on it; together they are one plate thick. For anything that has to rotate in the flat.
Ball joint14417 + 14704A small ball on one plate and a socket on another. It bends in every direction and holds by friction. It pivots at the middle of the plate, so a right-angle fold lands a quarter plate off.
Double clip60470Two clips side by side on one plate, gripping the same bar. A hinge with two grips cannot twist, so use it for anything wider than one stud.