Lessons8 · Studs underneath

Chains that land on the grid

Every chain that lands on a stud column, drawn and numbered. Filter by the part you start from, the direction you need and how exactly it has to land.

To use this page, choose three things with the buttons: the part you are starting from, which way the new stud has to point, and how exactly it has to land. The cards that remain are your options. Each one names its parts in order, draws the chain twice, and says where the stud ends up.

43 of the 85 land exactly on the plate grid and 42 sit half a plate off. The half-plate results are not failures: pair one with a second half-plate part and the error cancels.

A brick with a side stud, two plates on edge and a second brick with a side stud lying on its side, its stud pointing up
A chain of four parts, in side view and in 3D. Every card below is drawn the same way.

On each card, X is how many stud columns out from the source the new stud stands. Z says how the base of that stud compares with the source: for a stud pointing up it is measured from the top of the source, for a stud pointing down from its underside. “Level” means no difference at all.

Source
Output
Height
85 of 85 shown
R01

Side-stud brick → inverted bracket

3D view: Side-stud brick, 0 plates, Inverted bracket
  • Studs up ↑
  • ½ plate off
  • 2 parts
X
+1 stud out 20 LDU
Z
Stud root +½ plate from the source’s top face +4 LDU
Parts
87087 · 36840
R02

Side-stud brick → inverted bracket, 2 high

3D view: Side-stud brick, 0 plates, Inverted bracket, 2 high
  • Studs up ↑
  • ½ plate off
  • 2 parts
X
+1 stud and +2 studs out 20 / 40 LDU
Z
Stud root +½ plate from the source’s top face +4 LDU
Parts
87087 · 73825
R03

Side-stud brick → ⅔ side-stud plate

3D view: Side-stud brick, 0 plates, ⅔ side-stud plate
  • Studs up ↑
  • On plate grid
  • 2 parts
X
+1 stud out 20 LDU
Z
Stud root level with the source’s top face +0 LDU
Parts
87087 · 3386
R04

Side-stud brick → 1⅔ side-stud brick

3D view: Side-stud brick, 0 plates, 1⅔ side-stud brick
  • Studs up ↑
  • On plate grid
  • 2 parts
X
+1 stud and +2 studs out 20 / 40 LDU
Z
Stud root level with the source’s top face +0 LDU
Parts
87087 · 32952
R05

Side-stud brick → inverted bracket

3D view: Side-stud brick, 0 plates, Inverted bracket
  • Studs down ↓
  • On plate grid
  • 2 parts
X
+1 stud out 20 LDU
Z
Stud root level with the source’s bottom face +0 LDU
Parts
87087 · 36840
R06

Side-stud brick → inverted bracket, 2 high

3D view: Side-stud brick, 0 plates, Inverted bracket, 2 high
  • Studs down ↓
  • On plate grid
  • 2 parts
X
+1 stud and +2 studs out 20 / 40 LDU
Z
Stud root level with the source’s bottom face +0 LDU
Parts
87087 · 73825
R07

Side-stud brick → ⅔ side-stud plate

3D view: Side-stud brick, 0 plates, ⅔ side-stud plate
  • Studs down ↓
  • ½ plate off
  • 2 parts
X
+1 stud out 20 LDU
Z
Stud root +½ plate from the source’s bottom face +4 LDU
Parts
87087 · 3386
R08

Side-stud brick → 1⅔ side-stud brick

3D view: Side-stud brick, 0 plates, 1⅔ side-stud brick
  • Studs down ↓
  • ½ plate off
  • 2 parts
X
+1 stud and +2 studs out 20 / 40 LDU
Z
Stud root +½ plate from the source’s bottom face +4 LDU
Parts
87087 · 32952
R09

Side-stud brick + 2 plates → headlight brick

3D view: Side-stud brick, 2 plates, Headlight brick
  • Studs up ↑
  • ½ plate off
  • 4 parts
X
+2 studs out 40 LDU
Z
Stud root −½ plate from the source’s top face -4 LDU
Parts
87087 · 2× 3024 · 4070
R10

Side-stud brick + 2 plates → side-stud brick

3D view: Side-stud brick, 2 plates, Side-stud brick
  • Studs up ↑
  • On plate grid
  • 4 parts
X
+2 studs out 40 LDU
Z
Stud root level with the source’s top face +0 LDU
Parts
87087 · 2× 3024 · 87087
R11

Side-stud brick + 2 plates → headlight brick

3D view: Side-stud brick, 2 plates, Headlight brick
  • Studs down ↓
  • On plate grid
  • 4 parts
X
+2 studs out 40 LDU
Z
Stud root +1 plate from the source’s bottom face +8 LDU
Parts
87087 · 2× 3024 · 4070
R12

Side-stud brick + 2 plates → side-stud brick

3D view: Side-stud brick, 2 plates, Side-stud brick
  • Studs down ↓
  • ½ plate off
  • 4 parts
X
+2 studs out 40 LDU
Z
Stud root +½ plate from the source’s bottom face +4 LDU
Parts
87087 · 2× 3024 · 87087
R13

⅔ side-stud plate → inverted bracket

3D view: ⅔ side-stud plate, 0 plates, Inverted bracket
  • Studs up ↑
  • On plate grid
  • 2 parts
X
+1 stud out 20 LDU
Z
Stud root +1 plate from the source’s top face +8 LDU
Parts
3386 · 36840
R14

⅔ side-stud plate → inverted bracket, 2 high

3D view: ⅔ side-stud plate, 0 plates, Inverted bracket, 2 high
  • Studs up ↑
  • On plate grid
  • 2 parts
X
+1 stud and +2 studs out 20 / 40 LDU
Z
Stud root +1 plate from the source’s top face +8 LDU
Parts
3386 · 73825
R15

⅔ side-stud plate → ⅔ side-stud plate

3D view: ⅔ side-stud plate, 0 plates, ⅔ side-stud plate
  • Studs up ↑
  • ½ plate off
  • 2 parts
X
+1 stud out 20 LDU
Z
Stud root +½ plate from the source’s top face +4 LDU
Parts
3386 · 3386
R16

⅔ side-stud plate → 1⅔ side-stud brick

3D view: ⅔ side-stud plate, 0 plates, 1⅔ side-stud brick
  • Studs up ↑
  • ½ plate off
  • 2 parts
X
+1 stud and +2 studs out 20 / 40 LDU
Z
Stud root +½ plate from the source’s top face +4 LDU
Parts
3386 · 32952
R17

⅔ side-stud plate → inverted bracket

3D view: ⅔ side-stud plate, 0 plates, Inverted bracket
  • Studs down ↓
  • ½ plate off
  • 2 parts
X
+1 stud out 20 LDU
Z
Stud root −½ plate from the source’s bottom face -4 LDU
Parts
3386 · 36840
R18

⅔ side-stud plate → inverted bracket, 2 high

3D view: ⅔ side-stud plate, 0 plates, Inverted bracket, 2 high
  • Studs down ↓
  • ½ plate off
  • 2 parts
X
+1 stud and +2 studs out 20 / 40 LDU
Z
Stud root −½ plate from the source’s bottom face -4 LDU
Parts
3386 · 73825
R19

⅔ side-stud plate → ⅔ side-stud plate

3D view: ⅔ side-stud plate, 0 plates, ⅔ side-stud plate
  • Studs down ↓
  • On plate grid
  • 2 parts
X
+1 stud out 20 LDU
Z
Stud root level with the source’s bottom face +0 LDU
Parts
3386 · 3386
R20

⅔ side-stud plate → 1⅔ side-stud brick

3D view: ⅔ side-stud plate, 0 plates, 1⅔ side-stud brick
  • Studs down ↓
  • On plate grid
  • 2 parts
X
+1 stud and +2 studs out 20 / 40 LDU
Z
Stud root level with the source’s bottom face +0 LDU
Parts
3386 · 32952
R21

⅔ side-stud plate + 2 plates → headlight brick

3D view: ⅔ side-stud plate, 2 plates, Headlight brick
  • Studs up ↑
  • On plate grid
  • 4 parts
X
+2 studs out 40 LDU
Z
Stud root level with the source’s top face +0 LDU
Parts
3386 · 2× 3024 · 4070
R22

⅔ side-stud plate + 2 plates → side-stud brick

3D view: ⅔ side-stud plate, 2 plates, Side-stud brick
  • Studs up ↑
  • ½ plate off
  • 4 parts
X
+2 studs out 40 LDU
Z
Stud root +½ plate from the source’s top face +4 LDU
Parts
3386 · 2× 3024 · 87087
R23

⅔ side-stud plate + 2 plates → headlight brick

3D view: ⅔ side-stud plate, 2 plates, Headlight brick
  • Studs down ↓
  • ½ plate off
  • 4 parts
X
+2 studs out 40 LDU
Z
Stud root +½ plate from the source’s bottom face +4 LDU
Parts
3386 · 2× 3024 · 4070
R24

⅔ side-stud plate + 2 plates → side-stud brick

3D view: ⅔ side-stud plate, 2 plates, Side-stud brick
  • Studs down ↓
  • On plate grid
  • 4 parts
X
+2 studs out 40 LDU
Z
Stud root level with the source’s bottom face +0 LDU
Parts
3386 · 2× 3024 · 87087
R25

Headlight brick → headlight brick

3D view: Headlight brick, 0 plates, Headlight brick
  • Studs up ↑
  • ½ plate off
  • 2 parts
X
+1 stud out 20 LDU
Z
Stud root −½ plate from the source’s top face -4 LDU
Parts
4070 · 4070
R26

Headlight brick → side-stud brick

3D view: Headlight brick, 0 plates, Side-stud brick
  • Studs up ↑
  • On plate grid
  • 2 parts
X
+1 stud out 20 LDU
Z
Stud root level with the source’s top face +0 LDU
Parts
4070 · 87087
R27

Headlight brick → headlight brick

3D view: Headlight brick, 0 plates, Headlight brick
  • Studs down ↓
  • On plate grid
  • 2 parts
X
+1 stud out 20 LDU
Z
Stud root +1 plate from the source’s bottom face +8 LDU
Parts
4070 · 4070
R28

Headlight brick → side-stud brick

3D view: Headlight brick, 0 plates, Side-stud brick
  • Studs down ↓
  • ½ plate off
  • 2 parts
X
+1 stud out 20 LDU
Z
Stud root +½ plate from the source’s bottom face +4 LDU
Parts
4070 · 87087
R29

Headlight brick + 2 plates → bracket

3D view: Headlight brick, 2 plates, Bracket
  • Studs up ↑
  • ½ plate off
  • 4 parts
X
+1 stud out 20 LDU
Z
Stud root +½ plate from the source’s top face +4 LDU
Parts
4070 · 2× 3024 · 36841
R30

Headlight brick + 2 plates → bracket

3D view: Headlight brick, 2 plates, Bracket
  • Studs down ↓
  • On plate grid
  • 4 parts
X
+1 stud out 20 LDU
Z
Stud root level with the source’s bottom face +0 LDU
Parts
4070 · 2× 3024 · 36841
R31

Headlight brick + 3 plates → inverted bracket

3D view: Headlight brick, 3 plates, Inverted bracket
  • Studs up ↑
  • ½ plate off
  • 5 parts
X
+2 studs out 40 LDU
Z
Stud root +½ plate from the source’s top face +4 LDU
Parts
4070 · 3× 3024 · 36840
R32

Headlight brick + 3 plates → inverted bracket, 2 high

3D view: Headlight brick, 3 plates, Inverted bracket, 2 high
  • Studs up ↑
  • ½ plate off
  • 5 parts
X
+2 studs and +3 studs out 40 / 60 LDU
Z
Stud root +½ plate from the source’s top face +4 LDU
Parts
4070 · 3× 3024 · 73825
R33

Headlight brick + 3 plates → ⅔ side-stud plate

3D view: Headlight brick, 3 plates, ⅔ side-stud plate
  • Studs up ↑
  • On plate grid
  • 5 parts
X
+2 studs out 40 LDU
Z
Stud root level with the source’s top face +0 LDU
Parts
4070 · 3× 3024 · 3386
R34

Headlight brick + 3 plates → 1⅔ side-stud brick

3D view: Headlight brick, 3 plates, 1⅔ side-stud brick
  • Studs up ↑
  • On plate grid
  • 5 parts
X
+2 studs and +3 studs out 40 / 60 LDU
Z
Stud root level with the source’s top face +0 LDU
Parts
4070 · 3× 3024 · 32952
R35

Headlight brick + 3 plates → inverted bracket

3D view: Headlight brick, 3 plates, Inverted bracket
  • Studs down ↓
  • On plate grid
  • 5 parts
X
+2 studs out 40 LDU
Z
Stud root level with the source’s bottom face +0 LDU
Parts
4070 · 3× 3024 · 36840
R36

Headlight brick + 3 plates → inverted bracket, 2 high

3D view: Headlight brick, 3 plates, Inverted bracket, 2 high
  • Studs down ↓
  • On plate grid
  • 5 parts
X
+2 studs and +3 studs out 40 / 60 LDU
Z
Stud root level with the source’s bottom face +0 LDU
Parts
4070 · 3× 3024 · 73825
R37

Headlight brick + 3 plates → ⅔ side-stud plate

3D view: Headlight brick, 3 plates, ⅔ side-stud plate
  • Studs down ↓
  • ½ plate off
  • 5 parts
X
+2 studs out 40 LDU
Z
Stud root +½ plate from the source’s bottom face +4 LDU
Parts
4070 · 3× 3024 · 3386
R38

Headlight brick + 3 plates → 1⅔ side-stud brick

3D view: Headlight brick, 3 plates, 1⅔ side-stud brick
  • Studs down ↓
  • ½ plate off
  • 5 parts
X
+2 studs and +3 studs out 40 / 60 LDU
Z
Stud root +½ plate from the source’s bottom face +4 LDU
Parts
4070 · 3× 3024 · 32952
R39

1⅔ side-stud brick (upper stud) → inverted bracket

3D view: 1⅔ side-stud brick, 0 plates, Inverted bracket
  • Studs up ↑
  • ½ plate off
  • 2 parts
X
+1 stud out 20 LDU
Z
Stud root +½ plate from the source’s top face +4 LDU
Parts
32952 · 36840
R40

1⅔ side-stud brick (upper stud) → inverted bracket, 2 high

3D view: 1⅔ side-stud brick, 0 plates, Inverted bracket, 2 high
  • Studs up ↑
  • ½ plate off
  • 2 parts
X
+1 stud and +2 studs out 20 / 40 LDU
Z
Stud root +½ plate from the source’s top face +4 LDU
Parts
32952 · 73825
R41

1⅔ side-stud brick (upper stud) → ⅔ side-stud plate

3D view: 1⅔ side-stud brick, 0 plates, ⅔ side-stud plate
  • Studs up ↑
  • On plate grid
  • 2 parts
X
+1 stud out 20 LDU
Z
Stud root level with the source’s top face +0 LDU
Parts
32952 · 3386
R42

1⅔ side-stud brick (upper stud) → 1⅔ side-stud brick

3D view: 1⅔ side-stud brick, 0 plates, 1⅔ side-stud brick
  • Studs up ↑
  • On plate grid
  • 2 parts
X
+1 stud and +2 studs out 20 / 40 LDU
Z
Stud root level with the source’s top face +0 LDU
Parts
32952 · 32952
R43

1⅔ side-stud brick (upper stud) → inverted bracket

3D view: 1⅔ side-stud brick, 0 plates, Inverted bracket
  • Studs down ↓
  • On plate grid
  • 2 parts
X
+1 stud out 20 LDU
Z
Stud root +2 plates from the source’s bottom face +16 LDU
Parts
32952 · 36840
R44

1⅔ side-stud brick (upper stud) → inverted bracket, 2 high

3D view: 1⅔ side-stud brick, 0 plates, Inverted bracket, 2 high
  • Studs down ↓
  • On plate grid
  • 2 parts
X
+1 stud and +2 studs out 20 / 40 LDU
Z
Stud root +2 plates from the source’s bottom face +16 LDU
Parts
32952 · 73825
R45

1⅔ side-stud brick (upper stud) → ⅔ side-stud plate

3D view: 1⅔ side-stud brick, 0 plates, ⅔ side-stud plate
  • Studs down ↓
  • ½ plate off
  • 2 parts
X
+1 stud out 20 LDU
Z
Stud root +2½ plates from the source’s bottom face +20 LDU
Parts
32952 · 3386
R46

1⅔ side-stud brick (upper stud) → 1⅔ side-stud brick

3D view: 1⅔ side-stud brick, 0 plates, 1⅔ side-stud brick
  • Studs down ↓
  • ½ plate off
  • 2 parts
X
+1 stud and +2 studs out 20 / 40 LDU
Z
Stud root +2½ plates from the source’s bottom face +20 LDU
Parts
32952 · 32952
R47

1⅔ side-stud brick (upper stud) + 2 plates → headlight brick

3D view: 1⅔ side-stud brick, 2 plates, Headlight brick
  • Studs up ↑
  • ½ plate off
  • 4 parts
X
+2 studs out 40 LDU
Z
Stud root −½ plate from the source’s top face -4 LDU
Parts
32952 · 2× 3024 · 4070
R48

1⅔ side-stud brick (upper stud) + 2 plates → side-stud brick

3D view: 1⅔ side-stud brick, 2 plates, Side-stud brick
  • Studs up ↑
  • On plate grid
  • 4 parts
X
+2 studs out 40 LDU
Z
Stud root level with the source’s top face +0 LDU
Parts
32952 · 2× 3024 · 87087
R49

1⅔ side-stud brick (upper stud) + 2 plates → headlight brick

3D view: 1⅔ side-stud brick, 2 plates, Headlight brick
  • Studs down ↓
  • On plate grid
  • 4 parts
X
+2 studs out 40 LDU
Z
Stud root +3 plates from the source’s bottom face +24 LDU
Parts
32952 · 2× 3024 · 4070
R50

1⅔ side-stud brick (upper stud) + 2 plates → side-stud brick

3D view: 1⅔ side-stud brick, 2 plates, Side-stud brick
  • Studs down ↓
  • ½ plate off
  • 4 parts
X
+2 studs out 40 LDU
Z
Stud root +2½ plates from the source’s bottom face +20 LDU
Parts
32952 · 2× 3024 · 87087
R51

1⅔ side-stud brick (lower stud) → inverted bracket

3D view: 1⅔ side-stud brick, 0 plates, Inverted bracket
  • Studs up ↑
  • On plate grid
  • 2 parts
X
+1 stud out 20 LDU
Z
Stud root −2 plates from the source’s top face -16 LDU
Parts
32952 · 36840
R52

1⅔ side-stud brick (lower stud) → inverted bracket, 2 high

3D view: 1⅔ side-stud brick, 0 plates, Inverted bracket, 2 high
  • Studs up ↑
  • On plate grid
  • 2 parts
X
+1 stud and +2 studs out 20 / 40 LDU
Z
Stud root −2 plates from the source’s top face -16 LDU
Parts
32952 · 73825
R53

1⅔ side-stud brick (lower stud) → ⅔ side-stud plate

3D view: 1⅔ side-stud brick, 0 plates, ⅔ side-stud plate
  • Studs up ↑
  • ½ plate off
  • 2 parts
X
+1 stud out 20 LDU
Z
Stud root −2½ plates from the source’s top face -20 LDU
Parts
32952 · 3386
R54

1⅔ side-stud brick (lower stud) → 1⅔ side-stud brick

3D view: 1⅔ side-stud brick, 0 plates, 1⅔ side-stud brick
  • Studs up ↑
  • ½ plate off
  • 2 parts
X
+1 stud and +2 studs out 20 / 40 LDU
Z
Stud root −2½ plates from the source’s top face -20 LDU
Parts
32952 · 32952
R55

1⅔ side-stud brick (lower stud) → inverted bracket

3D view: 1⅔ side-stud brick, 0 plates, Inverted bracket
  • Studs down ↓
  • ½ plate off
  • 2 parts
X
+1 stud out 20 LDU
Z
Stud root −½ plate from the source’s bottom face -4 LDU
Parts
32952 · 36840
R56

1⅔ side-stud brick (lower stud) → inverted bracket, 2 high

3D view: 1⅔ side-stud brick, 0 plates, Inverted bracket, 2 high
  • Studs down ↓
  • ½ plate off
  • 2 parts
X
+1 stud and +2 studs out 20 / 40 LDU
Z
Stud root −½ plate from the source’s bottom face -4 LDU
Parts
32952 · 73825
R57

1⅔ side-stud brick (lower stud) → ⅔ side-stud plate

3D view: 1⅔ side-stud brick, 0 plates, ⅔ side-stud plate
  • Studs down ↓
  • On plate grid
  • 2 parts
X
+1 stud out 20 LDU
Z
Stud root level with the source’s bottom face +0 LDU
Parts
32952 · 3386
R58

1⅔ side-stud brick (lower stud) → 1⅔ side-stud brick

3D view: 1⅔ side-stud brick, 0 plates, 1⅔ side-stud brick
  • Studs down ↓
  • On plate grid
  • 2 parts
X
+1 stud and +2 studs out 20 / 40 LDU
Z
Stud root level with the source’s bottom face +0 LDU
Parts
32952 · 32952
R59

1⅔ side-stud brick (lower stud) + 2 plates → headlight brick

3D view: 1⅔ side-stud brick, 2 plates, Headlight brick
  • Studs up ↑
  • On plate grid
  • 4 parts
X
+2 studs out 40 LDU
Z
Stud root −3 plates from the source’s top face -24 LDU
Parts
32952 · 2× 3024 · 4070
R60

1⅔ side-stud brick (lower stud) + 2 plates → side-stud brick

3D view: 1⅔ side-stud brick, 2 plates, Side-stud brick
  • Studs up ↑
  • ½ plate off
  • 4 parts
X
+2 studs out 40 LDU
Z
Stud root −2½ plates from the source’s top face -20 LDU
Parts
32952 · 2× 3024 · 87087
R61

1⅔ side-stud brick (lower stud) + 2 plates → headlight brick

3D view: 1⅔ side-stud brick, 2 plates, Headlight brick
  • Studs down ↓
  • ½ plate off
  • 4 parts
X
+2 studs out 40 LDU
Z
Stud root +½ plate from the source’s bottom face +4 LDU
Parts
32952 · 2× 3024 · 4070
R62

1⅔ side-stud brick (lower stud) + 2 plates → side-stud brick

3D view: 1⅔ side-stud brick, 2 plates, Side-stud brick
  • Studs down ↓
  • On plate grid
  • 4 parts
X
+2 studs out 40 LDU
Z
Stud root level with the source’s bottom face +0 LDU
Parts
32952 · 2× 3024 · 87087
R63

Inverted bracket + 1 plate → bracket

3D view: Inverted bracket, 1 plates, Bracket
  • Studs up ↑
  • On plate grid
  • 3 parts
X
+1 stud out 20 LDU
Z
Stud root +2 plates from the source’s top face +16 LDU
Parts
36840 · 1× 3024 · 36841
R64

Inverted bracket + 1 plate → bracket, 2 high

3D view: Inverted bracket, 1 plates, Bracket, 2 high
  • Studs up ↑
  • On plate grid
  • 3 parts
X
0 stud and +1 stud out 0 / 20 LDU
Z
Stud root +2 plates from the source’s top face +16 LDU
Parts
36840 · 1× 3024 · 79389
R65

Inverted bracket + 1 plate → bracket

3D view: Inverted bracket, 1 plates, Bracket
  • Studs down ↓
  • ½ plate off
  • 3 parts
X
+1 stud out 20 LDU
Z
Stud root −½ plate from the source’s bottom face -4 LDU
Parts
36840 · 1× 3024 · 36841
R66

Inverted bracket + 1 plate → bracket, 2 high

3D view: Inverted bracket, 1 plates, Bracket, 2 high
  • Studs down ↓
  • ½ plate off
  • 3 parts
X
0 stud and +1 stud out 0 / 20 LDU
Z
Stud root −½ plate from the source’s bottom face -4 LDU
Parts
36840 · 1× 3024 · 79389
R67

Inverted bracket + 2 plates → inverted bracket

3D view: Inverted bracket, 2 plates, Inverted bracket
  • Studs up ↑
  • On plate grid
  • 4 parts
X
+2 studs out 40 LDU
Z
Stud root +2 plates from the source’s top face +16 LDU
Parts
36840 · 2× 3024 · 36840
R68

Inverted bracket + 2 plates → inverted bracket, 2 high

3D view: Inverted bracket, 2 plates, Inverted bracket, 2 high
  • Studs up ↑
  • On plate grid
  • 4 parts
X
+2 studs and +3 studs out 40 / 60 LDU
Z
Stud root +2 plates from the source’s top face +16 LDU
Parts
36840 · 2× 3024 · 73825
R69

Inverted bracket + 2 plates → ⅔ side-stud plate

3D view: Inverted bracket, 2 plates, ⅔ side-stud plate
  • Studs up ↑
  • ½ plate off
  • 4 parts
X
+2 studs out 40 LDU
Z
Stud root +1½ plates from the source’s top face +12 LDU
Parts
36840 · 2× 3024 · 3386
R70

Inverted bracket + 2 plates → 1⅔ side-stud brick

3D view: Inverted bracket, 2 plates, 1⅔ side-stud brick
  • Studs up ↑
  • ½ plate off
  • 4 parts
X
+2 studs and +3 studs out 40 / 60 LDU
Z
Stud root +1½ plates from the source’s top face +12 LDU
Parts
36840 · 2× 3024 · 32952
R71

Inverted bracket + 2 plates → inverted bracket

3D view: Inverted bracket, 2 plates, Inverted bracket
  • Studs down ↓
  • ½ plate off
  • 4 parts
X
+2 studs out 40 LDU
Z
Stud root −½ plate from the source’s bottom face -4 LDU
Parts
36840 · 2× 3024 · 36840
R72

Inverted bracket + 2 plates → inverted bracket, 2 high

3D view: Inverted bracket, 2 plates, Inverted bracket, 2 high
  • Studs down ↓
  • ½ plate off
  • 4 parts
X
+2 studs and +3 studs out 40 / 60 LDU
Z
Stud root −½ plate from the source’s bottom face -4 LDU
Parts
36840 · 2× 3024 · 73825
R73

Inverted bracket + 2 plates → ⅔ side-stud plate

3D view: Inverted bracket, 2 plates, ⅔ side-stud plate
  • Studs down ↓
  • On plate grid
  • 4 parts
X
+2 studs out 40 LDU
Z
Stud root level with the source’s bottom face +0 LDU
Parts
36840 · 2× 3024 · 3386
R74

Inverted bracket + 2 plates → 1⅔ side-stud brick

3D view: Inverted bracket, 2 plates, 1⅔ side-stud brick
  • Studs down ↓
  • On plate grid
  • 4 parts
X
+2 studs and +3 studs out 40 / 60 LDU
Z
Stud root level with the source’s bottom face +0 LDU
Parts
36840 · 2× 3024 · 32952
R75

Bracket + 1 plate → bracket

3D view: Bracket, 1 plates, Bracket
  • Studs up ↑
  • ½ plate off
  • 3 parts
X
+1 stud out 20 LDU
Z
Stud root +½ plate from the source’s top face +4 LDU
Parts
36841 · 1× 3024 · 36841
R76

Bracket + 1 plate → bracket

3D view: Bracket, 1 plates, Bracket
  • Studs down ↓
  • On plate grid
  • 3 parts
X
+1 stud out 20 LDU
Z
Stud root −2 plates from the source’s bottom face -16 LDU
Parts
36841 · 1× 3024 · 36841
R77

Bracket + 1 plate → bracket, 2 high

3D view: Bracket, 1 plates, Bracket, 2 high
  • Studs down ↓
  • On plate grid
  • 3 parts
X
0 stud and +1 stud out 0 / 20 LDU
Z
Stud root −2 plates from the source’s bottom face -16 LDU
Parts
36841 · 1× 3024 · 79389
R78

Bracket + 2 plates → inverted bracket

3D view: Bracket, 2 plates, Inverted bracket
  • Studs up ↑
  • ½ plate off
  • 4 parts
X
+2 studs out 40 LDU
Z
Stud root +½ plate from the source’s top face +4 LDU
Parts
36841 · 2× 3024 · 36840
R79

Bracket + 2 plates → inverted bracket, 2 high

3D view: Bracket, 2 plates, Inverted bracket, 2 high
  • Studs up ↑
  • ½ plate off
  • 4 parts
X
+2 studs and +3 studs out 40 / 60 LDU
Z
Stud root +½ plate from the source’s top face +4 LDU
Parts
36841 · 2× 3024 · 73825
R80

Bracket + 2 plates → ⅔ side-stud plate

3D view: Bracket, 2 plates, ⅔ side-stud plate
  • Studs up ↑
  • On plate grid
  • 4 parts
X
+2 studs out 40 LDU
Z
Stud root level with the source’s top face +0 LDU
Parts
36841 · 2× 3024 · 3386
R81

Bracket + 2 plates → 1⅔ side-stud brick

3D view: Bracket, 2 plates, 1⅔ side-stud brick
  • Studs up ↑
  • On plate grid
  • 4 parts
X
+2 studs and +3 studs out 40 / 60 LDU
Z
Stud root level with the source’s top face +0 LDU
Parts
36841 · 2× 3024 · 32952
R82

Bracket + 2 plates → inverted bracket

3D view: Bracket, 2 plates, Inverted bracket
  • Studs down ↓
  • On plate grid
  • 4 parts
X
+2 studs out 40 LDU
Z
Stud root −2 plates from the source’s bottom face -16 LDU
Parts
36841 · 2× 3024 · 36840
R83

Bracket + 2 plates → inverted bracket, 2 high

3D view: Bracket, 2 plates, Inverted bracket, 2 high
  • Studs down ↓
  • On plate grid
  • 4 parts
X
+2 studs and +3 studs out 40 / 60 LDU
Z
Stud root −2 plates from the source’s bottom face -16 LDU
Parts
36841 · 2× 3024 · 73825
R84

Bracket + 2 plates → ⅔ side-stud plate

3D view: Bracket, 2 plates, ⅔ side-stud plate
  • Studs down ↓
  • ½ plate off
  • 4 parts
X
+2 studs out 40 LDU
Z
Stud root −1½ plates from the source’s bottom face -12 LDU
Parts
36841 · 2× 3024 · 3386
R85

Bracket + 2 plates → 1⅔ side-stud brick

3D view: Bracket, 2 plates, 1⅔ side-stud brick
  • Studs down ↓
  • ½ plate off
  • 4 parts
X
+2 studs and +3 studs out 40 / 60 LDU
Z
Stud root −1½ plates from the source’s bottom face -12 LDU
Parts
36841 · 2× 3024 · 32952

Download CSV