Every clip grips the same 3.18 mm bar. What changes from one clip to the next is which way the bar runs and where it sits against the studs. The positions below are measured from the LDraw part files.
In each drawing the clip is grey and the bar it holds is blue. “Out” means sideways from the centre of the stud; “below the top” means down from the top face of the part, not counting its stud.
- Plate 1×1, horizontal clip61252, 6019The basic hinge clip. Bar axis horizontal, 20 LDU out from the stud centre and 2 LDU below the top face.

- Plate 1×1, vertical clip60897, 4085cHolds an upright bar 20 LDU out, exactly on the next stud position.

- Plate 1×2, two horizontal clips60470The double clip. Two grips on one axis, one in front of each stud and 20 LDU apart; 20 LDU out, 2 LDU below the top face. Two grips stop the hinge twisting.

- Plate 1×2, clip on the side11476A single clip centred between the two studs, so the grip sits on a half-stud position. 20 LDU out, 2 LDU below the top face.

- Plate 1×2, horizontal clip on the end63868The same pivot turned in line with the plate: 20 LDU beyond the end stud, 2 LDU below the top face.

- Plate 1×2, vertical clip on the end78256Holds an upright bar 20 LDU beyond the end stud, one stud past the plate.

- Plate 1×2, clip on top44861, 92280The clip replaces the second stud. Its bar runs across the plate, over that stud position and 6 LDU above the top face.

- Tile 1×1 with clip15712, 2555A clip standing on a tile: the bar is centred over the tile, 6 LDU above its top face.

- Brick 1×1, horizontal clip6047620 LDU out and 10 LDU below the top face: the same height as the side stud of an 87087.

- Brick 1×1, vertical clip60475Holds an upright bar 20 LDU out from the stud centre, at mid-height of the brick.

- Brick 1×2, vertical clip30237One clip centred between the two studs; the upright bar stands 20 LDU out on a half-stud position.

- Bar holder with clip11090A clip on a short tube. The tube takes a bar end, at right angles to the bar the clip grips.

- Bar 1.5L with clip48729A clip on a bar stub: plug the bar into a hollow stud or another clip to mount a clip anywhere.

- Mechanical arm, two clips30377Two parallel clips whose axes are 40 LDU apart: exactly two studs.

- Round brick with bar and vertical clip4735A bar on one side and a vertical clip on the other; the clip holds an upright bar 40 LDU from the stud centre.
